Filter
Top Products
Setting the Cold Reset Default
A Cold Reset procedure returns most user-selectable Control
Panel Menu selections to their factory defaults, including Paper
Size and Tray 1 Size settings. All 220/240 printers are set from
the factory to default to A4 paper size settings when the user
performs either a Cold Reset or Factory Default Reset procedure.
However, when a Formatter is replaced after leaving the factory
(due to a need for service), a Cold Reset or Factory Default Reset
will result in apaper size of Letter for the default paper size.
To reset the default Cold Reset (and Factory Default Reset) paper
size value to A4:
1 Enter the Service Mode as described previously.
2 Press the [Menu] key to display SERVICE MENU.
3 Press the [Item] key to display CR PAPER=LETTER
4 Press the [Value+/-] key to toggle between Letter and A4 paper.
5 Press the [Select] key to save your selection.
6 Press [Go] to exit the Service Mode.
For more information regarding the Cold Reset procedure, refer
to Chapter 3 of this manual.
LaserJet 5/5M/5N Printer B-27