Filter
Top Products
Cold Reset
The Cold Reset feature of the printers allows the printer to be
returned instantly to the factory default configuration settings.
This feature is valuable because the the Dynamic I/O and PJL
features of the printer enable any user connected to any I/O to
access and change the default configuration as applications
require. When setting up the printer in a new location, or when
troubleshooting printer problems, always perform the Cold Reset
before entering the selected user defaults. A Cold Reset can not
reset the page count, cold reset tray size, or display
language settings. If the Control Panel is locked, a Cold Reset
will disable the lock and return the printer to the factory defaults.
Inform the system administrator of all Cold Resets.
A Cold Reset is performed as follows:
1 Turn OFF the printer.
2 Hold the [On-Line] (or Go for the LJ5) key down while powering
ON the printer.
3 The message COLD RESET is displayed. The COLD RESET does
not take effect until the 00 READY message is displayed.
4
When the 00 READY message is displayed, the default settings
have been returned to the factory defaults and the printer is
ready to accept new settings.
Configuration 3-23