Filter
Top Products
Personality SIMM
(PostScript)
A personality (printer language) SIMM installation can be
verified as outlined below (a PostScript SIMM is used in this
example).
Note
For the LaserJet 5/5M/5N, the On Line key has
been replaced by the Go key. The Enter key has
been replaced by the Select key.
1 Plug in the power cord and turn ON the printer.
2 After a few seconds, the on line indicator should light and 00
READY should appear in the control panel display. If an error
message appears, refer to “Troubleshooting a SIMM Board”
following.
3 Press [On Line to take the printer off line.
4 Press [Menu] until JOB MENU appears in the control panel
display.
5 Press [Item] until PERSONALITY=AUTO*, the default, appears in
the control panel display.
6 Press [+] until PERSONALITY=PS appears in the display. This
indicates that your printer recognizes that PostScript is
installed. If PERSONALITY=PS does not appear, check the
SIMM installation.
7 Press [On Line] to return the printer on line.
3-58 Configuration