Filter
Top Products
Removing the Back Cover
1 Place the duplexer on a table or bench so that the back
overhangs the edge by a few inches.
2 Release the (2) locating pins as shown in Figure A-9.
3 Rotate the cover downward until it is free.
Removing the Front Cover
With the side covers removed, the front cover is only attached by
the holding tray arm.
1
With both side covers removed, open the holding tray.
2
Rotate the front cover 90 degrees to release the holding tray
arm.
Figure A-9 Back Cover
Duplexer A -13