Filter
Top Products
Setting the Page Count
The page count is stored in the printer’s Non-Volatile Memory
(NVRAM). If it is necessary to replace the Formatter PCA, the
page count should be reset to the printer’s original page count to
reflect the age of the print engine. Use the following procedure to
set the page count:
1 Enter the Service Mode as described previously.
2
When SERVICE MODE is displayed, press the [Menu+] key to
access the Service Menu. Press the [Item+] key to step through
the menu.
3 PAGES=XXXXXX is displayed. XXXXXX represents the page count
currently stored in the printer’s NVRAM. The underlined
character denotes the cursor position.
4 Press the [Value+] or Value- key to change the value of the
selected digit. Holding down the key scrolls through the
values for the digit at approximately 5 values per second.
5 Press the Select key to select the correct value. The cursor
automatically advances to the next digit.
6 Set each digit in the same manner. When the last digit’s value
has been entered, the printer automatically returns to
SERVICE MODE.
7 Press the [Go] key one more time to exit Service Mode.
B-26 LaserJet 5/5M/5N Printer