Filter
Top Products
Removing the High Voltage Contact Assembly
and Feed Guide Assembly
Note
The following procedures are difficult and the
components are damaged easily. The tolerances
between the parts are close and several attempts
may be necessary before the procedure is
complete.
1 Perform all the steps of “Accessing the High Voltage Contact
Plate/Feed Guide Assembly” in the order given.
2 Press the tab shown in Figure 6-56 to release the gear cover.
3 Release the (5) latches that hold the Contact Plate in place
(see Figure 6-56). Set the Contact Plate on the latch slots.
4 Free the Left Toner Cartridge Guide Assembly from its
retainers.
5
Lift the Contactor Plate and the Toner Cartridge Guide
Assembly out of the printer, Toner Cartridge Guide Assembly
first.
Figure 6-56 High Voltage Contact and Feed Guide Assembly
Latches
6-67 Removal and Replacement