Message Symptoms and Recommendations
FR REMOVE CART An accessory cartridge was installed while the printer was
in an error state. To clear this message, remove the
cartridge, clear the pending error condition, then install the
cartridge.
ME FEED
[envelope size]
MANUALLY FEED
[envelope size]
This message is displayed when there is a request for a
manually fed envelope. envelope size may be: COM10,
MONARCH, DL, C5, B5, or ENVELOPE. Insert the appropriate
envelope size into the MP tray (Tray 1), and press [On Line]*
to print.
MF FEED
[paper size]
MANUALLY FEED
[paper size]
This message is displayed when there is a request for
manually fed media. Paper size may be: LETTER, LEGAL,
EXEC, or A4. Insert the appropriate media size into the MP
tray, and press [On Line]* to print, or press [Continue]* to
feed from the Paper Cassette (Tray 2).
PC INSTALL
INSTALL TRAY 2
The printer currently has the Lower Cassette or duplexer
selected as the paper source, and has detected that the
Paper Cassette (Tray 2), which serves as a paper guide for
the Lower Cassette, is not installed. Install (reseat) the
Paper Cassette.
xx LOAD [paper size
or envelope size]
TRAY x LOAD [size]
ENVELOPE FEEDER
[envelope size]
The printer received a request for a paper or envelope size
not available in the printer. The xx is MP (Multi-Purpose), PC
(Paper Cassette), or LC (Lower cassette). Paper size may
be: LETTER, LEGAL, EXEC, or A4; for MP tray, envelope
sizes may be COM10, MONARCH, DL, C5, or B5. Load the
correct paper tray and/or media, or press [Continue]* to use
the media in the installed tray(s). The printer continues
automatically. If the problem persists, refer to page 7-13.
*
Press Go on the LJ5
.
Table 7-1
Printer Messages (continued)
Troubleshooting 7-9