Filter
Top Products
Situation Solution
The printer prints only part of a
page or document.
The connection has been broken
during transmission. If you move
the portable device during
transmission, the connection can
be broken. IrDA-compliant
devices are designed to recover
from temporary connection
interruptions. Re-establish the
connection (depending on the
device you are using, you can
have anywhere from 3 to 20
seconds to re-establish the
connection)
The print job has been properly
sent to the printer, but the printer
will not print.
If the connection is broken
before the entire print job has
been transmitted to the printer
(printing has not yet started), the
printer may not print any of the
job. If the Data light is on, press
the Job Cancel button to clear
the printer’s memory. Then,
position the device within the
range of operation, and print the
job again.
The IR status light turns off
during transmission.
The connection may have been
broken If the Data light is on,
press the Job Canel button to
clear the printer’s memory.
Then, position the device within
the range of operation, and print
the job again.
B-42 LaserJet 5/5M/5N Printer