Filter
Top Products
Control Panel and Overlay Removal
1 Remove the Right Side Cover and the Top Cover.
2 Turn the Top Cover over and place it on flat surface.
3 Release the (3) latches that contain the Control Panel (see
Figure 6-21, callout 1).
4 Carefully pivot the Control Panel away from the Top Cover.
(continued on next page)
Note
To remove the LaserJet 5 Control Panel, first
remove the black screw securing the grounding
leaf spring and the Control Panel plate to the Top
Cover. Release the two latches at the top of the
Control Panel Assembly and pivot the top of the
assembly up and out of the printer.
Figure 6-21 Control Panel Latches
Removal and Replacement 6-23