Filter
Top Products
IXF1104 Quad-Port 10/100/1000 Mbps Ethernet Media Access Controller
Datasheet 93
Document Number: 278757
Revision Number: 007
Revision Date: March 25, 2004
5.3.1 GMII Signal Multiplexing
The GMII balls are reassigned when using the RGMII mode or fiber mode. Table 16 “Line Side
Interface Multiplexed Balls” on page 57 specifies the multiplexing of GMII balls in these modes.
See Section 5.1.3, “Mixed-Mode Operation” on page 74 for proper configuration of the IXF1104 in
GMII mode.
5.3.2 GMII Interface Signal Definition
Table 26 “GMII Interface Signal Definitions” on page 94 provides the GMII interface signal
definitions. For information on 1000BASE-T GMII transmit and receive timing diagrams and
tables, please refer to Table 49 “GMII 1000BASE-T Transmit Signal Parameters” on page 141,
Figure 38 “1000BASE-T Transmit Interface Timing” on page 141, Figure 39 “1000BASE-T
Receive Interface Timing” on page 142, and Table 50 “GMII 1000BASE-T Receive Signal
Parameters” on page 142
Figure 17. MAC GMII Interconnect
TXC_3:0
TX_EN_3:0
TX_ER_3:0
RXC_3:0
TXD[7:0]_0
TXD[7:0]_3
TXD[7:0]_2
TXD[7:0]_1
RX_EN_3:0
RX_ER_3:0
RXD[7:0]_0
RXD[7:0]_3
RXD[7:0]_2
RXD[7:0]_1
COL_3:0
CRS_3:0
Intel
®
IXF1104
Media Access Controller
TXC_3:0
TX_EN_3:0
TX_ER_3:0
TXD[7:0]_0
TXD[7:0]_3
TXD[7:0]_2
TXD[7:0]_1
RXC_3:0
RX_EN_3:0
RX_ER_3:0
RXD[7:0]_0
RXD[7:0]_3
RXD[7:0]_2
RXD[7:0]_1
COL_3:0
CRS_3:0
Quad PHY Device
B3203-0
1