Filter
Top Products
Installing JDM on UNIX or Linux 111
Minimum requirements
JDM supports two UNIX platforms and one Linux platform:
•
a UNIX SPARC* workstation running the Sun* Solaris* 2.7, 2.8, 2.1.0.
(or higher)
•
a PC running Linux Kernel 2.2 operating system (or higher)
The minimum system requirements for installing JDM on any UNIX or Linux
platform are:
•
4 MB available in a temporary directory
•
400 MB free in the directory where you want to install the JDM software
•
512 MB DRAM
Installing JDM on Solaris from the CD
To install the JDM software to a Solaris environment from the CD, use the
following procedure:
Step Action
1
Close all programs.
2
Insert the software CD into your CD-ROM drive.
3
Navigate to the Solaris/JDM subdirectory on the software CD.
4
Run the dm_xxxx_solaris_sparc.sh file.
See "Executing the JDM installation software on UNIX or Linux"
(page 113).
—End—
Installing JDM on Linux from the CD
To install the Device Manager software to a Linux environment from the CD,
use the following procedure:
Step Action
1
Close all programs.
2
Insert the software CD into your CD-ROM drive.
3
Navigate to the Linux/JDM subdirectory on the software CD.
4
Run the jdm_xxxx_linux.sh file.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.