Filter
Top Products
258 Configuring the switch using Device Manager
Step Action
1
From the Device Manager main menu, choose Edit > IP.
The IP dialog box appears with the Globals tab displayed.
2
Click the UDP Listeners tab.
The UDP Listeners tab appears.
The following table describes the UDP Listeners tab fields.
Table 116
UDP Listeners tab fields
Field Description
LocalAddress The local IP address for this UDP listener. In the case
of a UDP listener that accepts datagrams for any IP
interface associated with the node, the value 0.0.0.0
is used.
LocalPort The local port number for this UDP listener.
—End—
Editing the chassis configuration
You can edit a chassis configuration from the Edit Chassis dialog box.
To open the Chassis dialog box, use the following procedure:
Step Action
1 Select the chassis.
2
Do one of the following:
•
From the Device Manager main menu, choose Edit > Chassis.
—End—
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.