Filter
Top Products
208 System configuration using the CLI
Setting time on network elements using Simple Network Time
Protocol
The Simple Network Time Protocol (SNTP) feature synchronizes the
Universal Coordinated Time (UTC) to an accuracy within 1 second. This
feature adheres to the IEEE RFC 2030 (MIB is the s5agent). With this
feature, the system can obtain the time from any RFC 2030-compliant
NTP/SNTP server.
ATTENTION
If you have trouble using this feature, try various NTP servers. Some NTP servers
may be overloaded or currently inoperable.
•
"show sntp command" (page 208)
•
"sntp enable command" (page 209)
•
"no sntp enable command" (page 209)
•
"sntp server primary address command" (page 209)
•
"sntp server secondary address command" (page 210)
•
"no sntp server command" (page 210)
• "sntp sync-now command" (page 211)
•
"sntp sync-interval command" (page 211)
•
"default sntp command" (page 212)
show sntp command
The show sntp command displays the SNTP information, as well as the
configured NTP servers. The syntax for the show sntp command is:
show sntp
The show sntp command is executed in the Privileged EXEC command
mode.
The show sntp command has no parameters or variables.
Figure 73 "show sntp command output" (page 209) displays sample output
from the show sntp command.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.