Filter
Top Products
Switch management features 67
You can also set the CLI password using the cli password command,
or the Password Setting web-based management page. When you log on
to the switch, you are prompted to enter a valid user name. Therefore,
ensure you are aware of the valid usernames (default RW and RO) before
you change passwords.
For the standard software image, the default password for user RO is "user"
and for user RW is "secure". For the secure software image, the default
password for RO is "userpasswd" and for RW is "securepasswd".
For more information about this and other advanced security features
supported on the Ethernet Routing Switch 2500 Series, see Nortel Ethernet
Routing Switch 2500 Series Security — Configuration and Management
(NN47215-505).
Logging in
If you set a password using the username or cli password command,
the next time you access the switch, you are prompted for a username
and password as shown in Figure 21 "Login screen" (page 67) (default
usernames are RW and RO).
Figure 21
Login screen
Enter a valid user name and password and press Enter. You are then
directed to the CLI.
For the standard software image, the default password for user RO is "user"
and for user RW is "secure". For the secure software image, the default
password for RO is "userpasswd" and for RW is "securepasswd".
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.