Filter
Top Products
324 Configuring the switch using web-based management
Item Range Description
System Up Time
The elapsed time since the last network management portion
of the system was last re-initialized.
ATTENTION
This field is updated only when the screen is redisplayed.
System Name
1..255
Type a character string to create a name to identify the switch,
for example Finance Group.
System Location
1..255
Type a character string to create a name for the switch location,
for example, First Floor.
System Contact
1..255
Type a character string to create the contact information for the
network manager or the selected person to contact regarding
switch operation, for example, mcarlson@company.com
ATTENTION
To operate correctly with the Web interface, the system
contact should be an e-mail address.
2
Type information in the text boxes.
3
Click Submit.
—End—
Configuring switch port status
You can use the Port Management page to configure a specific switch port
or all switch ports to autonegotiate for the highest available speed of the
connected station or you can set the speed for selected switch ports.
ATTENTION
Autonegotiation is not supported on 1000 Mb/s fiber optic ports.
You can disable switch ports that are trunk members, if you choose to
disable them one by one. If you choose to disable all ports of the unit or
stack, the changes cannot have effect on the ports belonging to MLTs.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.