Filter
Top Products
264 Configuring the switch using Device Manager
Field Description
ATTENTION
1. This field is applicable only to
components that can be found in
either the Board or Unit groups. If the
information is unavailable, for example,
the chassis is not modeling a virtual
chassis or component is not in Board or
Unit group, the value is a zero length
string.
2. If this field is applicable and is not
assigned a value through a SNMP
SET PDU when the row is created, the
value defaults to the value of the object
s5ChasComSerNum.
LstChng The value of sysUpTime when it was
detected that the component/sub-component
was added to the chassis. If this action has
not occurred since the cold/warm start of the
agent, then the value is zero.
AdminState The state of the component or subcomponent.
The values that are read-only are:
•
other – currently in some other state
•
notAvail – actual value is not available
The possible values that can be read and
written are:
•
disable—disables operation
• enable—enables operation
•
reset—resets component
•
test—starts self test of component,
with the result to be normal, warning,
nonFatalErr, or fatalErr in object
s5ChasComOperState The allowable
(and meaningful) values are determined
by the component type.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.