Filter
Top Products
Enabling and disabling autosave 207
The show autosave command has no parameters or variables.
Figure 72 "show autosave command output" (page 207) displays sample
output from the show autosave command.
Figure 72
show autosave command output
autosave enable command
The autosave enable command enables the autosave feature. The
syntax for the autosave enable command is:
autosave enable
The autosave enable command is executed in the Global Configuration
command mode.
The autosave enable command has no parameters or variables.
no autosave enable command
The no autosave enable command disables the autosave feature. The
syntax for the no autosave enable command is:
no autosave enable
The no autosave enable command is executed in the Global
Configuration command mode.
The no autosave enable command has no parameters or variables.
default autosave enable command
The default autosave enable command defaults the autosave feature
to the default value of enabled. The syntax for the default autosave
enable command is:
default autosave enable
The default autosave enable command is executed in the Global
Configuration command mode.
The default autosave enable command has no parameters or
variables.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.