Filter
Top Products
254 Configuring the switch using Device Manager
Table 112
Globals tab fields
Field and MIB
association
Description
DefaultTTL Default value inserted into the Time-To-Live field of
the IP header of datagrams originated by the switch,
whenever a TTL value is not supplied by the transport
layer protocol. Default value is 64.
ReasmTimeout Maximum number of seconds that received fragments
are held while they are awaiting reassembly by the
switch. Default value is 60.
Addresses tab
The Addresses tab shows the IP address information for the device.
To open the Addresses tab, use the following procedure:
Step Action
1
From the Device Manager main menu, choose Edit > IP.
The IP dialog box appears with the Globals tab displayed.
2
Click the Addresses tab.
The Addresses tab appears.
Edit IP dialog box IP Address tab
—End—
The following table describes the Address tab fields.
Table 113
Addresses tab fields
Field Description
Addr The device IP address.
NetMask The subnet mask address.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.