Nortel Networks 2500 Series Switch User Manual


 
353
Appendix D
Command List
This appendix provides the complete CLI command list in alphabetical
order, with approximate page references for the beginning pages of further
explanations.
ATTENTION
This information is presented for reference only and must not be considered
to be an exact representation.
Table 156
CLI command list
Command
Page No.
auto-negotiation-advertisements [port <portlist>]
[10-full] [10-half] [100-full] [100-half] [1000-full]
[asymm-pause-frame] [pause-frame] [none]
"auto-negotiation-advertisements command"
(page 246)
auto-pvid Nortel Ethernet Routing Switch 2500 Series
Configuration VLANs, Spanning Tree, and
MultiLink Trunking (NN47215-501)
autotopology "autotopology command" (page 216)
autosave enable "autosave enable command" (page 207)
banner [ custom | static | disabled | <1-19> LINE ]
"banner command for displaying banner" (page
201)
blink-leds [off | time <1-10>]
"Configuring LEDs to blink on the display panel"
(page 229)
boot [default] "boot command" (page 196)
clear logging [nv | nonvolatile | volatile]
Nortel Ethernet Routing Switch 2500 Series
Performance Management — System Monitoring
(NN47215-502)
clear-stats [port<portlist>] Nortel Ethernet Routing Switch 2500 Series
Performance Management — System Monitoring
(NN47215-502)
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.