Filter
Top Products
192 System configuration using the CLI
show running-config
Figure 62 "show running-config command output" (page 192) shows the
output of the show running-config command
Figure 62
show running-config command output
copy running-config tftp command
This command copies contents of the current configuration file to another
file on the TFTP server. The syntax of the command is
copy running-config tftp {<address> <filename>}
This command can be executed in the Global Configuration command mode.
Table 57 "copy running-config tftp command parameters and variables"
(page 192) describes the parameters and variables of this command.
Table 57
copy running-config tftp command parameters and variables
Parameter Description
address Signifies the IP address of the TFTP server.
filename Denotes the filename to store configuration commands
on the TFTP server.
ATTENTION
Use the copy running-config tftp command only from the base unit in
a stack.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.