Related publications 19
separator ( > ) Shows menu paths.
Example: Protocols > IP identifies the IP command on
the Protocols menu.
vertical line ( | )
Separates choices for command keywords and
arguments. Enter only one of the choices. Do not type
the vertical line when entering the command.
Example: If the command syntax is
show ip {alerts|routes}, you enter either
show ip alerts or show ip routes, but not both.
Related publications
For more information about using the Ethernet Routing Switch 2500, see
the following publications:
• Nortel Ethernet Routing Switch 2500 Series Release NotesNortel
Ethernet Routing Switch 2500 Series Release Notes — Software
Release 4.0 (NN47215-400)
Documents important changes about the software and hardware that
are not covered in other related publications.
•
Nortel Ethernet Routing Switch 2500 Series Configuration — VLANs,
Spanning Tree, and MultiLink Trunking (NN47215-501)
Describes how to configure Virtual Local Area Networks (VLAN),
Spanning Tree Protocol (STP), and MultiLink Trunk (MLT) features for
the Nortel Ethernet Routing Switch 2500.
•
Nortel Ethernet Routing Switch 2500 Series Configuration — Quality
of Service (NN47215-504)
Describes how to configure and manage Quality of Service and IP
Filtering features for the Nortel Ethernet Routing Switch 2500.
•
Nortel Ethernet Routing Switch 2500 Series Security — Configuration
and Management (NN47215-505)
Describes how to configure and manage security for the Nortel Ethernet
Routing Switch 2500.
•
Nortel Ethernet Routing Switch 2500 Series Performance Management
— System Monitoring (NN47215-502)
Describes how to configure system logging and network monitoring,
and how to display system statistics for the Nortel Ethernet Routing
Switch 2500.
•
Nortel Ethernet Routing Switch 2500 Series Configuration — IP
Multicast (NN47215-503)
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.