Filter
Top Products
Enabling Autopology 215
show clock time-zone
The show clock time-zone command is executed in the Global
Configuration command mode.
The show clock time-zone command has no parameters or variables.
Figure 74 "show clock time-zone output" (page 215) displays sample output
from the show clock time-zone command.
Figure 74
show clock time-zone output
show clock summer-time
The show clock summer-time command displays the daylight savings
time settings. The syntax for the show clock summer-time command is:
show clock summer-time
The show clock summer-time command is executed in the Global
Configuration command mode.
The show clock summer-time command has no parameters or
variables.
Figure 75 "show clock summer-time" (page 215) displays sample output
from the show clock summer-time command.
Figure 75
show clock summer-time
Enabling Autopology
You can enable the Optivity* Autopology* protocol using the CLI. See
w
ww.nortel.com/support for information on Autopology. (The product family
for Optivity and Autotopology is Data and Internet.) This section covers the
following commands:
• "autotopology command" (page 216)
•
"no autotopology command" (page 216)
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.