Filter
Top Products
330 Configuring the switch using web-based management
ATTENTION
The LED indications described in the following table apply to a 2526T switch
model. Although a 2550T switch provides similar LED indications, the LED
indication sequence is associated within the 48-port range.
Table 147
LED Indications during the software download process
Phase Description LED Indications
1
The switch downloads the new
software image and programs it.
100 Mb/s port status LEDs (ports 18 to 24
only): The LEDs begin to turn on in succession
on each ASIC as follows: ASIC 1 from port 1 to
port 12 and return, ASIC 2 from with port 24 to
port 13 and return, ASIC 3 from port 25 to port
36 and return, ASIC 4 from port 48 to port 37
and return.
2
The switch resets automatically.
After the reset completes, the new software
image initiates the switch self-test, which
comprises various diagnostic routines and
subtests.
ATTENTION
The LEDs display various patterns to indicate
that the subtests are in progress.
Downloading ASCII configuration files
The ASCII Config Download feature lets you upload an ASCII configuration
file from a personal computer to the Ethernet Routing Switch 2500 Series.
In the current implementation, you require a TFTP server to upload an ASCII
configuration file to the Ethernet Routing Switch 2500 Series. But with this
feature the requirement of a TFTP server is eliminated. This feature lets you
upload an ASCII configuration file using the HTTP protocol.
To download the ASCII configuration file to the Ethernet Routing Switch
2500 Series.
Step Action
1
From the main menu, choose Configuration > Ascii Config
Download.
2
The Ascii Configuration File Download page appears.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.