Filter
Top Products
Editing and viewing switch PoE configurations using Device Manager 175
Color
Description
Red P Specifies that the power and detection mechanism for the
port is disabled.
Orange P Specifies that the power and detection mechanism for the port
is enabled. However the port is not currently delivering power.
White/Gray P Specifies that the power and detection mechanism for the
port is unknown.
ATTENTION
The coloring scheme for data aspect and the power aspect are independent of
each other. With this GUI enhancement, you can view the initial status for both
data and power aspect for the port.
PoE tab for ports
The PoE tab lets you configure PoE power settings for ports.
To view the PoE tab, use the following procedure:
Step Action
1
Select the port you want to edit.
2
Do one of the following:
• Double-click the selected port.
•
From the shortcut menu, choose Edit.
•
From the Device Manager main menu, choose Edit > Port.
• On the toolbar, click Edit.
The Port dialog box appears with the Interface tab displayed.
3
Click the PoE tab.
The PoE tab appears.
Edit Port dialog box— PoE tab
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.