Filter
Top Products
303
Configuring ports using Device
Manager
This chapter describes how to use Device Manager to configure ports on an
Ethernet Routing Switch 2500 Series.
The windows displayed when you configure a single port differ from the
ones displayed when you configure multiple ports. However, the options
are similar.
This section covers:
• "Viewing and editing a single port configuration" (page 303)
•
"Viewing and editing multiple port configurations" (page 307)
Viewing and editing a single port configuration
To view or edit the configuration of a single port, use the following procedure:
→
Do one of the following:
• Double-click on a single port.
•
From the Device Manager main menu, choose Edit > Port.
•
From the shortcut menu, choose Edit.
•
From the toolbar, click Edit.
ATTENTION
When you edit a single port, tabs that are not applicable are not available for
you to select.
When you edit multiple ports, some tabs are not available, and some tabs are
available even though the options are not applicable. When the option does not
apply for a given port, NoSuchObject is displayed.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.