Filter
Top Products
270 Configuring the switch using Device Manager
—End—
To set the default banner, use the following procedure:
Step Action
1
In the Banner tab, click on the static radio button, and then click
Apply. This resets the banner in Telnet to the default banner.
To check that the default banner is set in Telnet:
2
In the main menu, click on Device > Telnet.
The Telnet window appears with the default banner displayed.
—End—
Figure 93
Telnet window with default banner
To disable the banner:
→
In the Banner tab, click on the disabled radio button, and then click Apply.
To check that the banner is disabled:
→
In the main menu, click on Device > Telnet.
The Telnet window appears without the banner.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.