Filter
Top Products
142 Getting Started with Device Manager
Figure 46
Web-based management home page
Trap log
You can configure an Ethernet Routing Switch 2500 Series to send SNMP
generic traps. When the Device Manager is running, any traps received are
recorded in the trap log. You set the maximum number of entries in the trap
log using the Properties dialog box ("DCAM-6270493" (page 120)). The
default number of trap log entries is 500.
To view the trap log, use the following procedure:
→
Do one of the following:
• On the toolbar, click the Trap Log button.
• From the Device Manager Main Menu, choose Device > Trap Log.
ATTENTION
When you operate Device Manager from a UNIX platform, you must be logged in
as root in order to receive traps.
Device Manager receives traps on port 162. If this port is being used by
another application, you cannot view the trap log until the other application
is disabled and Device Manager is restarted.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.