Filter
Top Products
Configuring PoE using web-based management 169
Item Description
DTE Power
Consumption
Displays total power use on all devices currently drawing power.
DTE Power
Usage Threshold
Enter the percentage of total power consumption on the switch necessary to
trigger a trap.
The default value is 80%.
Power Pair
Displays the power pair of the RJ-45 pin connectors that supplies the power.
The only available option for the Ethernet Routing Switch 2500 Seris is Signal.
ATTENTION
Ensure that the power pair used by the IP devices you are powering
matches the power pair for the Ethernet Routing Switch 2500 Series.
Traps Control Choose to enable or disable trap from agent.
PD Detect Type
Choose the type of power detection you want for the switch:
•
802.3af
•
802.3af and legacy
The default is 802.3af.
ATTENTION
Ensure that the power detection method you choose for the Ethernet
Routing Switch 2500 Series matches that used by the IP devices you are
powering.
Power Source
Present
This display-only field displays the current power supply for the switch:
•
AC Only--using only the internal power source of the switch
AC Power Status Displays the current status of AC power on the switch.
DC Power Status Displays the current status of DC power on the switch (Not Present).
2
Type the information, or make a selection from the list.
3
Click Submit.
—End—
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.