Filter
Top Products
Configuring high speed flow control 327
—End—
Configuring high speed flow control
You can view the High Speed Flow Control parameters for Ethernet Routing
Switch 2500 Series in this page.
To configure high speed flow control, use the following procedure:
Step Action
1
From the main menu, choose Configuration > High Speed Flow
Control.
The High Speed Flow Control page appears.
Figure 121
High Speed Flow Control page
The following table describes the items on the High Speed Flow
Control page.
Table 145
High Speed Flow Control page items
Item Range Description
Port The switch port number of the corresponding row.
Autonegotiation (1) Enabled
(2) Disabled
Displays if the autonegotiation feature is enabled or
disabled.
When enabled, the port advertises support only for
1000Mb/s operation in full-duplex mode.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.