Filter
Top Products
Customizing your system 199
no tftp-server command
The no tftp-server command clears the TFTP server IP address to
0.0.0.0. The syntax of the no tftp-server command is:
no tftp-server
The no tftp-server command is executed in the Global Configuration
command mode.
The no tftp-server command has no parameters or values.
default tftp-server command
The default tftp-server command sets the TFTP server IP address
to 0.0.0.0. The syntax of the default tftp-server command is:
default tftp-server
The default tftp-server command is executed in the Global
Configuration command mode.
The default tftp-server command has no parameters or values.
copy config tftp command
The copy config tftp command copies the current configuration file
onto the TFTP server. The syntax for the copy config tftp command is:
copy config tftp [address <XXX.XXX.XXX.XXX>] filename <WORD>
The copy config tftp command is executed in the Privileged EXEC
command mode.
Table 63 "copy config tftp command parameters and variables" (page
199) describes the parameters and variables for the copy config tftp
command.
Table 63
copy config tftp command parameters and variables
Parameters and
variables
Description
address <XXX.XXX.X
XX.XXX>
Specifies the TFTP server IP address; enter in
dotted-decimal notation.
filename <WORD> Specifies filename that you want to copy the
configuration file onto the TFTP server. Enter the name
you want the configuration file to have on the TFTP
server.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.