Filter
Top Products
166 Power over Ethernet for the Ethernet Routing Switch 2526T-PWR and 2550T-PWR
Table 40
show poe-port-status command parameters and variables
Parameters and
variables
Description
port <portlist>
Enter the ports for which you want to display the
status.
ATTENTION
If you omit this parameter, the system displays all
ports.
Figure 54 "show poe-port-status command output" (page 166) displays
sample output from the show poe-port-status command.
Figure 54
show poe-port-status command output
show poe-power-measurement command
The show poe-power-measurement command displays the voltage,
current and power values for each powered device connected to each port.
The syntax for the show poe-power-measurement command is:
show poe-power-measurement [port <portlist>]
The show poe-power-measurement command is executed in the User
Exec command mode.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.