Filter
Top Products
146 Using the Web-based management interface
Access to the Web management interface for the switch is enabled by
default. You can configure access to the interface using the CLI. For
information about enabling Web access, see Nortel Ethernet Routing Switch
2500 Series Security — Configuration and Management (NN47215-505).
Logging in to the web-based management interface
Before you log in to the web-based management interface, use the CLI to
verify the VLAN port assignments and to ensure that your switch CPU and
computer are assigned to the same VLAN. If the devices are not connected
to the same VLAN, the IP address cannot display the home page.
To log in to the web-based management interface, use the following
procedure:
Step Action
1
Start your Web browser.
2
In the address bar, type the IP address for your host switch, for
example, http://192.168.151.175, and press Enter.
The home page appears.
Web-based management interface home page
—End—
Network security does not exist the first time you access the embedded
Web server. The system administrator must create access parameters and
passwords to protect the integrity of your network configuration(s). For more
information, see Nortel Ethernet Routing Switch 2500 Series Security —
Configuration and Management (NN47215-505).
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.