Filter
Top Products
280 Configuring the switch using Device Manager
→
From the Device Manager menu bar, select Edit > Diagnostics > Topology.
The Toplogy dialog box appears with the Topology tab displayed.
Figure 98
Diagnostics dialog box Topology tab
Table 126 "Topology tab fields" (page 280) describes the Topology tab fields.
Table 126
Topology tab fields
Field Description
IpAddr The IP address of the device.
Status Whether Nortel topology is on (topOn) or off (topOff) for the
device. The default value is topOn.
NmmLstChg The value of sysUpTime the last time an entry in the network
management MIB (NMM) topology table was added, deleted,
or modified. If the table has not changed since the last cold
or warm start of the agent.
NmmMaxNum The maximum number of entries in the NMM topology table.
NmmCurNum The current number of entries in the NMM topology table.
Topology Table tab
To view more topology information, use the following procedure:
Step Action
1 From the Device Manager menu bar, choose Edit > Diagnostics >
Topology.
The Topology dialog box appears with the Topology tab displayed.
2
Click the Topology Table tab.
The Topology Table tab appears.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.