Filter
Top Products
220 System configuration using the CLI
Table 78
lldp config-notification command parameters and variables
Parameters and
variables
Description
<portlist>
Specifies the ports affected by the command.
no lldp config-notification command
no lldp config-notification command disables config notification.
The syntax for the no lldp config-notification command is:
no lldp [port <portlist>] config-notification
The no lldp config-notification command is executed in the
Interface Configuration command mode.
Table 79 "no lldp config-notification command parameters and variables"
(page 220) describes the parameters and variables for the no lldp
config-notification command.
Table 79
no lldp config-notification command parameters and variables
Parameters and
variables
Description
<portlist>
Specifies the ports affected by the command.
default lldp config-notification command
The default lldp config-notification command sets config
notification to its default value (disabled). The syntax for the default
lldp config-notification command is:
default lldp [port <portlist>] config-notification
The default lldp config-notification command is executed in
the Interface Configuration command mode.
Table 80 "default lldp config-notification command parameters and variables"
(page 220) describes the parameters and variables for the default lldp
config-notification command.
Table 80
default lldp config-notification command parameters and variables
Parameters and
variables
Description
line <portlist> Specifies the ports affected by the command.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.