Filter
Top Products
Setting local time zone 213
•
"no clock summer-time" (page 214)
•
"show clock time-zone" (page 214)
•
"show clock summer-time" (page 215)
clock time-zone
The clock time-zone command sets the local time zone relative to
Universal Coordinated Time (UTC). The syntax for the clock time-zone
command is:
clock time-zone <zone> <hours> <minutes>
The clock time-zone command is executed in the Global Configuration
command mode.
Table 74 "clock time-zone command parameters and variables" (page
213) describes the parameters and variables for the clock time-zone
command.
Table 74
clock time-zone command parameters and variables
Parameters and
variables
Description
zone
Time zone acronym that can be displayed when showing
system time (Range: Up to 4 characters)
hours Hours difference from UTC. (Valid Range: –12 to +12)
minutes Optional minutes difference from UTC. (Range: 0–59)
no clock time-zone
The no clock time-zone command disables the clock time zone
feature. The syntax for the no clock time-zone command is:
no clock time-zone
The no clock time-zone command is executed in the Global
Configuration command mode.
The no clock time-zone command has no parameters or variables.
clock summer-time
The clock summer-time command sets the daylight savings time with
start and end dates. The syntax for the clock summer-time command is:
clock summer-time <zone> [date {<day> <month> <year>
<hh:mm>} {<day> <month> <year> <hh:mm>}] [<offset>]
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.