Filter
Top Products
62 Nortel Ethernet Routing Switch 2500 Series stacking
There are no parameters or variables for the show stack auto-unit
replacement command.
stack auto-unit-replacement enable command
The stack auto-unit-replacement enable command enables AUR
on the switch.
The syntax for this command is:
stack auto-unit-replacement enable
The stack auto-unit-replacement enable command is executed
in the Global Configuration mode.
There are no parameters or variables for the stack auto-unit-
replacement enable command.
no stack auto-unit-replacement enable command
The no stack auto-unit-replacement enable command disables
AUR on the switch.
The syntax for this command is:
no stack auto-unit-replacement enable
The no stack auto-unit-replacement enable command is
executed in the Global Configuration mode.
There are no parameters or variables for the no stack
auto-unit-replacement enable command.
default stack auto-unit-replacement enable command
The default stack auto-unit-replacement enable command
restores the default AUR settings.
The syntax for this command is:
default stack auto-unit-replacement enable
The default stack auto-unit-replacement enable command is
executed in the Global Configuration mode.
There are no parameters or variables for the default stack
auto-unit-replacement enable command.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.