Filter
Top Products
174 Power over Ethernet for the Ethernet Routing Switch 2526T-PWR and 2550T-PWR
Item Description
Notification
ControlEnable
Lets you enable or disable sending traps if the switch power
usage exceeds the percentage set in the UsageThreshold
field.
PowerDevice
DetectType
Lets you set the power detection type that the switch uses
to detect a request for power from a device connected to
all ports on the switch:
• 802.3af
• 802.3af and legacy
ATTENTION
The default setting is 802.3af. Ensure that this setting
matches the setting for the detection type used by the
powered devices on this switch.
Device Manager display for PoE ports
The Device Manager displays PoE ports differently than non-PoE port.
ERS 2550T-PWR with PoE por ts
The port coloring scheme for the data aspect is the same for PoE ports
as for all other ports. The difference for the PoE ports is the addition of
the power aspect (colored p).
Table 45 "Port power color codes" (page 174) shows the status assigned to
each color.
Table 45
Port power color codes
Color
Description
Green P Specifies that the port is currently delivering power.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.