Filter
Top Products
Configuring PoE using web-based management 167
Table 41 "show poe-power-measurement command parameters and
variables" (page 167) shows the variables and parameters for the show
poe-power-measurement command.
Table 41
show poe-power-measurement command parameters and variables
Parameters and
variables
Description
port
<portlist>
Enter the ports for which you want to display the
power measurements.
ATTENTION
If you omit this parameter, the system displays all
ports.
Figure 55 " show poe-power-measurement command output" (page
167) displays sample output from the show poe-power-measurement
command.
Figure 55
show poe-power-measurement command output
Configuring PoE using web-based management
You can display and configure Power over Ethernet (PoE) parameters using
the web-based management system.
•
"Displaying and configuring power management for the switch" (page
168)
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.