Filter
Top Products
316 Administering the switch using web-based management
Changing the Ethernet Routing Switch 2500 Series to system
defaults
You can replace all configured switch parameters with the factory default
values.
CAUTION
If you choose change to default settings, all configured settings
are replaced with factory default settings when you click Submit.
For more information about factory default settings, see Appendix
"Default settings" (page 343).
During the process of changing to default settings, the switch initiates a
self-test that comprises various diagnostic routines and subtests. The LEDs
display various patterns to indicate that the subtests are in progress.
To change the Ethernet Routing Switch 2500 Series to system defaults:
Step Action
1
From the main menu, choose Administration > Reset to Default.
The reset to default warning message displays.
Figure 116
Reset to Default page message
—End—
Logging out of the management interface
To log out of the Web-based management interface, use the following
procedure:
Step Action
1
From the main menu, choose Administration > Logout.
A logout message displays.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.