Filter
Top Products
30 Ethernet Routing Switch 2500 Series hardware
Cooling fans
Cooling fans are located on one side of the Ethernet Routing Switch 2500
Series to provide cooling for the internal components. When you install
the switch, be sure to allow enough space on both sides of the switch for
adequate ventilation.
AC power receptacle
The AC power receptacle accepts the AC power cord that is supplied with
the switch. For installation outside North America, make sure that you
have the proper power cord for your region. Any cord used must have a
CEE-22 standard V female connector on one end and must meet the IEC
320-030 specifications.Table 4 "International power cord specifications"
(page 30) lists specifications for international power cords.
Table 4
International power cord specifications
Country/Plug
description
Specifications
Typical plug
Continental Europe:
•
CEE7 standard VII
male plug
•
Harmonized cord
(HAR marking on
the outside of the
cord jacket to comply
with the CENELEC
Harmonized
Document HD-21)
220 or 230 VAC 50 Hz
Single phase
U.S./Canada/Japan:
•
NEMA5-15P male
plug
•
UL recognized (UL
stamped on cord
jacket)
•
CSA certified (CSA
label secured to the
cord)
100 or 120 VAC 50– 60
Hz Single phase
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.