Filter
Top Products
Working with configuration files 273
Field Description
ImageFileName Name of the image file(s) currently associated with the
interface. When the object is not used, the value is a zero
length string.
FwFileName
(Diagnostics)
Specifies the FWFileName.
Action
•
This object is used to download or upload a config file,
an image file or diag firmware file. In read operation, if
there is no action taken since the boot up, it returns with
a value of other. Otherwise, it returns the latest action.
•
In a write operation, the values that can be written are:
dnldConfig
dnldImg
upIdConfig
dnldFw
dnldImgIfNewer
dnldImgNoReset
dnldFwNoReset
•
The newly downloaded config, image or diag file cannot
take effect until the next boot cycle of the device.
Status This object is used to get the status of the latest action as
shown by s5AgInfoFileAction. The values that can be read
are:
• other—if no action taken since the boot up
•
inProgress—the operation is in progress
•
success—the operation succeeds
•
fail—the operation failed
ASCII config file
To display the ASCII Config file tab, use the following procedure:
→
In the File System dialog box, click on the ASCII Config File tab.
The ASCII Config File tab appears.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.