Filter
Top Products
Quick Start 313
•
SNMP Write community
•
SNMP Trap IP addresses and communities (up to four)
•
New default VLAN
During the initial setup mode, all ports are assigned to the new default VLAN.
A port-based Quick Start VLAN is created if the new default VLAN does not
exist. All ports are removed from the current default VLAN and assigned to
the Quick Start VLAN. The PVIDs for all ports are changed to the Quick Start
VLAN. The Quick Start VLAN is also designated as the management VLAN.
To configure the initial settings using the Quick Start feature:
Step Action
1
From the main menu, select Administration > Quick Start.
The Quick Start page is displayed.
Figure 113
Quick Start page
2 Click on the Submit button after making the required settings.
The following table describes the items on the Quick Start page.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.