Filter
Top Products
198 System configuration using the CLI
•
"copy config tftp command" (page 199)
•
"copy tftp config command" (page 200)
show tftp-server command
The show tftp-server command displays the IP address of the server
used for all TFTP-related transfers. The syntax for the show tftp-server
command is:
show tftp-server
The show tftp-server command is executed in the Privileged EXEC
command mode.
The show tftp-server command has no parameters or variables.
Figure 66 "show tftp-server command output" (page 198) shows a sample
output of the show tftp-server command.
Figure 66
show tftp-server command output
tftp-server command
The tftp-server command assigns the address for the switch to use for
TFTP services. The syntax of the tftp-server command is:
tftp-server <XXX.XXX.XXX.XXX>
The tftp-server command is executed in the Global Configuration
command mode.
Table 62 "tftp-server command parameters and variables" (page
198) describes the parameters and variables for the tftp-server command.
Table 62
tftp-server command parameters and variables
Parameters and
variables
Description
XXX.XXX.XXX.XXX Enter the dotted-decimal IP address of the server you
want to use for TFTP services.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.