Filter
Top Products
236 Ethernet port management using the CLI
Parameters and
variables
Description
ATTENTION
If you omit this parameter, the system uses the port
number you specified in the interface command.
<LINE> Enter up to 26 alphanumeric characters.
no name command
The no name command clears the port names; it resets the field to an
empty string. The syntax for the no name command is:
no name [port <portlist>]
The no name command is executed in the Interface Configuration
command mode.
Table 94 "no name command parameters and variables" (page
236) describes the parameters and variables for the no name command.
Table 94
no name command parameters and variables
Parameters and
variables
Description
port <portlist>
Specifies the port numbers to clear of names.
ATTENTION
If you omit this parameter, the system uses the port
number you specified in the interface command.
default name command
The default name command clears the port names; it resets the field to
an empty string. The syntax for the default name command is:
default name [port <portlist>]
The default name command is executed in the Interface Configuration
command mode.
Table 95 "default name command parameters and variables" (page
237) describes the parameters and variables for the default name command.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.