Filter
Top Products
96 CLI Basics
Parameters
and variables
Description
force Instructs the switch to skip the shutdown confirmation
prompt.
minutes-to-wait
<1-80>
Specifies the number of minutes that pass before the
switch resets itself. The default wait time is set at 10
minutes.
ATTENTION
Any configurations or login performed on the switch after the shutdown command
is initiated are not saved to NVRAM and are lost after the reset.
The shutdown command is executed in the Privileged EXEC command
mode.
Managing basic system information
This section shows you how to view basic system information such as
the current software version. This section contains information about the
following topics:
• "show sys-info command" (page 96)
•
"show tech command" (page 97)
show sys-info command
The show sys-info command displays the current system characteristics.
The syntax for the show sys-info command is:
show sys-info
The show sys-info command is executed in the Privileged EXEC
command mode.
The show sys-info command has no parameters or variables.
Figure 25 "show sys-info command output" (page 97) displays sample
output from the show sys-info command.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.