Filter
Top Products
Identifying unit numbers 155
Stack Numbering screen fields
Field Item Range Description
Current Unit
Number
1..8
Unit number previously assigned to the
policy switch. The entries in this column are
displayed in order of their current physical
cabling with respect to the base unit, and
can show non-consecutive unit numbering
if one or more units were previously moved
or modified. The entries also can include
unit numbers of units that are no longer
participating in the stack (not currently
active).
MAC Address XX.XX.XX.XX.XX.X
X
MAC address of the corresponding unit
listed in the Current Unit Number field.
Stack Numb
ering Setting
New Unit
Number
1..8, None
Choose a new number to assign to your
selected policy switch.
ATTENTION
If you leave the field blank, the system
automatically selects the next available
number.
2 Choose the new number to assign to the switch.
3
Click Submit.
4
A message prompts for confirmation of the request. Click Yes.
—End—
Identifying unit numbers
Identify the unit numbers of the switches participating in a stack configuration
by viewing the LEDs on the front panel of each switch.
To identify unit numbers in your configuration:
Step Action
1 Open the Identify Unit Numbers screen by selecting Summary >
Identify Unit Numbers from the menu. This screen is illustrated in
Figure 52 "Identifying Unit Numbers page" (page 156).
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.