Filter
Top Products
Using DNS to ping and telnet 187
Table 53 "ip name-server command parameters and variables" (page
187) describes the parameters and variables for the ip name-server
command.
Table 53
ip name-server command parameters and variables
Parameters and
variables
Description
<A.B.C.D> Enter the IP address of a DNS server.
The default value is 0.0.0.0.
no ip name-server command
The no ip name-server command removes one or more DNS servers’
IP addresses. The syntax for the no ip name-server command is:
no ip name-server <A.B.C.D>
The no ip name-server command is executed in the Global
Configuration command mode.
Table 54 "no ip name-server command parameters and variables" (page
187) describes the parameters and variables for the no ip name-server
command.
Table 54
no ip name-server command parameters and variables
Parameters and
variables
Description
<A.B.C.D> Enter the IP address of a DNS server.
The default value is 0.0.0.0.
ip domain-name command
The ip domain-name command sets the system’s DNS domain name.
The syntax for the ip domain-name command is:
ip domain-name [<LINE>]
The ip domain-name command is executed in the Global Configuration
command mode.
Table 55 "ip domain-name command parameters and variables" (page
188) describes the parameters and variables for the ip domain-name
command.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.