Filter
Top Products
252 Configuring the switch using Device Manager
Rear Ports Mode tab Use the JDM to configure the operational mode
of the rear ports into standalone or Stacking Mode in the Ethernet Routing
Switch 2500 Series.
Step Action
1
From the JDM menu, select Edit > Unit. The Unit dialog box opens
with the Unit tab displayed.
2
Click the Rear Ports Mode tab. The Rear Ports Mode tab appears.
Rear Ports Mode tab
3
Select Standalone or Stacking Mode from the radio buttons to
configure the operational mode of the rear ports.
ATTENTION
A switch reboot is required to the configured operational mode to take
effect.
—End—
The following table describes the Rear Port Mode tab items.
Table 111
Rear Ports Mode tab fields
Field Description
RearPortAdminMode
•
Standalone: Select this radio button to
configure the operational mode of the rear
ports to Standalone Mode.
•
Stacking: Select this radio button to
configure the operational mode of the rear
ports to Stacking Mode.
RearPortOperMode
Displays the configured operational mode of the
rear ports.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.