Filter
Top Products
Enabling Custom Autonegotiation Advertisements (CANA) 247
Parameters and values Description
[10-full] [10-half]
[100-full] [100-half]
[1000-full]
[asymm-pause-frame]
[pause-frame]
These are speed-duplex-pause settings. Any
combination of these settings is allowed, but
parameters must be given in the order shown.
none
Do not advertise any settings during
auto-negotiation.
no auto-negotiation-advertisements command
The no auto-negotiation-advertisements command clears all
advertisements for the switch. This command is used for testing. The syntax
for the no auto-negotiation-advertisements command is:
no auto-negotiation-advertisements [port <portlist>]
ATTENTION
The use of this command affects traffic and brings down the link.
The no auto-negotiation-advertisements command is executed
in the Interface Configuration command mode.
Table 107 "no auto-negotiation-advertisements command"
(page 247) describes the parameters and variables for the no
auto-negotiation-advertisements command.
Table 107
no auto-negotiation-advertisements command
Parameters and values Description
port <portlist>
Enter ports for which you want to clear all
advertisements.
default auto-negotiation-advertisements command
The default auto-negotiation-advertisements command
sets default advertisements for the switch. The syntax for the default
auto-negotiation-advertisements command is:
default auto-negotiation-advertisements [port <portlist>]
The default auto-negotiation-advertisements command is
executed in the interface configuration command mode.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.