Filter
Top Products
E6581528
E-45
5
690V-50Hz default setting(=)
Setting tocauses default value is to be set for 690V-50Hz.
When to be set after setting default value is to be set for 690V-50Hz (same value as )
Setting tocauses all the following parameters to be changed from factory shipment (setting)
• Base frequency 1 : 50Hz •
RP/high-speed pulse input point 2 frequency
: 50Hz
• Base frequency voltage 1 : 690V •
Automatic light-load high-speed operation frequency
: 50Hz
.• Upper limit frequency : 50Hz •
Commercial power/inverter switching frequency
: 50Hz
• VI/II input point 2 frequency : 50Hz • PID deviation upper limit : 50Hz
• RR/S4 input point 2 frequency : 50Hz • PID deviation lower limit : 50Hz
• Base frequency 2 : 50Hz • Process upper limit : 50Hz
• Base frequency voltage 2 : 690V • PID output upper limit : 50Hz
• Base frequency 3 : 50Hz • Forward speed limit input level : 50Hz
• Base frequency voltage 2 : 690V • Reverse speed limit input level : 50Hz
• Base frequency 4 : 50Hz •
Undervoltage detection
level : 59%
• Base frequency voltage 4 : 690V •
Overvoltage limit operation
level :113%
• RX input point 2 frequency : 50Hz •
Regenerative power ride-through control
level: 75%
• AI1 input point 2 frequency : 50Hz • Point 2 frequency : 50Hz
• AI2 input point 2 frequency : 50Hz